DrayTek Vigor 2930n Security Dual WAN Broadband Router: LAN 4 10-100 Base-TX with port-based VLAN /2 WAN 10-100 Base-TX/802.11G AP/USB +n61

1. Dual-WAN Outbound Policy-Based Load-Balance

BoD ( Bandwidth on Demand )

WAN Connection Fail-over

2. Wireless Access Point IEEE 802.11n Compliant

Wireless Client List

Access Point Discovery

WDS ( Wireless Distribution System )

Wireless LAN Isolation

Wireless Rate-Control

64 / 128-bit WEP

WPA / WPA2

802.1X Authentication with RADIUS Client *

Hidden SSID

Multiple SSIDs

MAC Address Access Control

3. WAN Protocol DHCP Client

Static IP

PPPoE

PPTP

L2TP *

BPA

4. Firewall CSM ( Content Security Management ) for IM / P2P Applications

Multi-NAT, DMZ Host , Port-Redirection and Open Port

Policy-Based Firewall

MAC Address Filter

SPI ( Stateful Packet Inspection )

DoS / DDoS Protection

IP Address Anti-spoofing

E-Mail Alert and Logging via Syslog

Bind IP to MAC Address

5. VPN Up to 100 VPN Tunnels

Protocol : PPTP, IPSec , L2TP , L2TP over IPSec

Encryption : MPPE and Hardware-Based AES / DES / 3DES

Authentication : Hardware-Based MD5 , SHA-1

IKE Authentication : Pre-shared Key and Digital Signature ( X.509 )

LAN-to-LAN , Teleworker-to-LAN

DHCP over IPSec

NAT-Traversal ( NAT-T )

Dead Peer Detection ( DPD )

VPN Pass-Through

6. Bandwidth Management QoS :

Guarantee Bandwidth for VoIP

Class-based Bandwidth Guarantee by User-Defined Traffic Categories

DiffServ Code Point Classifying

4-level Priority for each Direction ( Inbound / Outbound )

Bandwidth Borrowed

Bandwidth / Session Limitation

7. Network Management Web-Based User Interface ( HTTP / HTTPS )

Quick Start Wizard

CLI ( Command Line Interface, Telnet / SSH * )

Administration Access Control

Configuration Backup / Restore

Built-in Diagnostic Function

Firmware Upgrade via TFTP/FTP

Logging via Syslog

SNMP Management MIB-II

8. Content Filter URL Keyword Blocking ( White List and Black List )

Java Applet , Cookies , Active X , Compressed , Executable , Multimedia File Blocking

Web Content Filter ( SurfControl )

Time Schedule Control

9. Network Features DHCP Client / Relay / Server

Port-based VLAN

Dynamic DNS

NTP Client

Call Scheduling

RADIUS Client

DNS Cache / Proxy

UPnP

Routing Protocol :

Static Routing

RIP V2

Technical Specifications of Vigor2930n

Hardware Interface LAN 4-port 10/100 Base-TX Switch

WAN 2-port 10/100 Base-TX Ethernet

WLAN IEEE 802.11n

Dual-WAN Outbound Policy-Based Load-Balance

BoD ( Bandwidth on Demand )

WAN Connection Fail-over

Wireless Access Point IEEE 802.11n Compliant

Wireless Client List

Access Point Discovery

WDS ( Wireless Distribution System )

Wireless LAN Isolation

Wireless Rate-Control

64 / 128-bit WEP

WPA / WPA2

802.1X Authentication with RADIUS Client *

Hidden SSID

Multiple SSIDs

MAC Address Access Control

WAN Protocol DHCP Client

Static IP

PPPoE

PPTP

L2TP *

BPA

Firewall CSM ( Content Security Management ) for IM / P2P Applications

Multi-NAT, DMZ Host , Port-Redirection and Open Port

Policy-Based Firewall

MAC Address Filter

SPI ( Stateful Packet Inspection )

DoS / DDoS Protection

IP Address Anti-spoofing

E-Mail Alert and Logging via Syslog

Bind IP to MAC Address

VPN Up to 100 VPN Tunnels

Protocol : PPTP, IPSec , L2TP , L2TP over IPSec

Encryption : MPPE and Hardware-Based AES / DES / 3DES

Authentication : Hardware-Based MD5 , SHA-1

IKE Authentication : Pre-shared Key and Digital Signature ( X.509 )

LAN-to-LAN , Teleworker-to-LAN

DHCP over IPSec

NAT-Traversal ( NAT-T )

Dead Peer Detection ( DPD )

VPN Pass-Through

Bandwidth Management QoS Class-based Bandwidth Guarantee by User-Defined Traffic Categories

DiffServ Code Point Classifying

4-level Priority for each Direction ( Inbound / Outbound )

Bandwidth Borrowed

Bandwidth / Session Limitation

Network Management Web-Based User Interface ( HTTP / HTTPS )

Quick Start Wizard

CLI ( Command Line Interface ) / Telnet / SSH *

Administration Access Control

Configuration Backup / Restore

Built-in Diagnostic Function

Firmware Upgrade via TFTP / FTP

Logging via Syslog

SNMP Management with MIB-II

Content Filter URL Keyword Blocking ( White list and Black list )

Java Applet , Cookies , Active X , Compressed / Executable / Multimedia File Blocking

Web Content Filter ( SurfControl )

Time Schedule Control

Network Features DHCP Client / Relay / Server

Dynamic DNS

NTP Client

Call Scheduling

RADIUS Client

DNS Cache / Proxy

UPnP

Port-Based VLAN

Routing Protocol Static Routing

RIP V2

Temperature Operating : 0°C ~ 45°C

Storage : -25°C ~ 70°C

Humidity 10% ~ 90% ( non-condensing )

Max. Power 18 Watt

Dimension L240.96 * W165.07 * H43.96 ( mm )

Power DC 15V

The Vigor2930 is a Dual-WAN router with policy-based load-balance, fail-over and BoD ( Bandwidth on Demand ) ; it also features advanced bandwidth control mechanisms such as IP-layer QoS, NAT session limitation, bandwidth borrowed, etc., to allow easy, flexible and reliable access control and bandwidth management.

Dual WAN Application

It allows users to access Internet and combine the bandwidth of the dual WAN to speed up the transmission through the network. Each WAN port can connect to different ISPs, Even if the ISPs use different technology to provide telecommunication service (such as DSL, Cable modem, etc.). If any connection problem occurred on one of the ISP connections, all the traffic will be guided and switched to the normal communication port for proper operation.

Firewall & VPN Application

The SPI ( Stateful packet Inspection ) firewall uses object-based design to make settings of firewall policies easy. The CSM ( Content Security Management ) feature enables more precise and efficient access control for IM ( Instant Messenger ) and P2P ( Peer to Peer ) applications. Furthermore, functions such as DoS / DDoS ( Denial of Service / Distributed DoS ) and URL / Web content filtering minimize security threats both inside and outside the network.

With hardware-based implementation of the VPN protocols, the Vigor2930 supports up to 100 VPN tunnels in compliance with advanced protocols such as IPSec / PPTP / L2TP / L2TP over IPSec with AES / DES / 3DES for encryption and MD5 / SHA-1 for authentication.