DrayTek Vigor 2930 Security Dual WAN Broadband Router: LAN 4 10-100 Base-TX with port-based VLAN /2 WAN 10-100 Base-TX/802.11G AP/USB printse


1. Dual-WAN Outbound Policy-Based Load-Balance
BoD ( Bandwidth on Demand )
WAN Connection Fail-over
 
2. WAN Protocol DHCP Client
Static IP
PPPoE
PPTP
L2TP *
BPA
 
3. Firewall CSM ( Content Security Management ) for IM / P2P Applications
Multi-NAT, DMZ Host, Port-Redirection and Open Port
Policy-Based Firewall
MAC Address Filter
SPI ( Stateful Packet Inspection )
DoS / DDoS Protection
IP Address Anti-spoofing
E-Mail Alert and Logging via Syslog
Bind IP to MAC Address
 
4. VPN Up to 100 VPN Tunnels
Protocol : PPTP , IPSec , L2TP , L2TP over IPSec
Encryption : MPPE and Hardware-Based AES / DES / 3DES
Authentication : Hardware-Based MD5 , SHA-1
IKE Authentication : Pre-shared Key and Digital Signature ( X.509 )
LAN-to-LAN , Teleworker-to-LAN
DHCP over IPSec
NAT-Traversal ( NAT-T )
Dead Peer Detection ( DPD )
VPN Pass-Through
 
5. Bandwidth Management QoS :
Guarantee Bandwidth for VoIP
Class-based Bandwidth Guarantee by User-Defined Traffic Categories
DiffServ Code Point Classifying
4-level Priority for each Direction ( Inbound / Outbound )
Bandwidth Borrowed
Bandwidth / Session Limitation
 
6. Network Management Web-Based User Interface ( HTTP / HTTPS )
Quick Start Wizard
CLI ( Command Line Interface, Telnet / SSH* )
Administration Access Control
Configuration Backup / Restore
Built-in Diagnostic Function
Firmware Upgrade via TFTP / FTP
Logging via Syslog
SNMP Management MIB-II
 
7. Content Filter URL Keyword Blocking ( White List and Black List )
Java Applet , Cookies , Active X , Compressed , Executable , Multimedia File Blocking
Web Content Filter ( SurfControl )
Time Schedule Control
 
8. Network Features DHCP Client / Relay / Server
Port-based VLAN
Dynamic DNS
NTP Client
Call Scheduling
RADIUS Client
DNS Cache / Proxy
UPnP
Routing Protocol :
Static Routing
RIP V2

Comments