DrayTek Vigor 2700G ADSL2/2+ Firewall Router


1. ADSL2/2+ Compliance ANSI T1.413 Issue2
ITU-T G.992.1 G.dmt
ITU-T G.992.3 ADSL2 G.dmt.bis
ITU-T G.992.5 ADSL2+
 
2. ATM Protocols RFC2684 MPoA ( Multiple Protocol over AAL5)
RFC2516 PPPoE ( PPP over Ethernet)
RFC2364 PPPoA ( PPP over AAL5)
PPPoE pass-throuth from LAN/WLAN
Transparent bridge for MPoA
 
3. Virtual Private Network (VPN) Facilities Up to 2 VPN tunnels
Supported protocol : PPTP , IPSec , L2TP , L2TP over IPSec
Encryption : AES , MPPE and hardware-based DES / 3DES
Authentication : MD5 , SHA-1
IKE authentication : pre-shared key and digital signature ( X.509 )
LAN-to-LAN , Teleworker-to-LAN
DHCP over IPSec
Dead Peer Detection ( DPD )
VPN Pass-Through
IPSec NAT-Traversal ( NAT-T)
 
4. QoS ( Quality of Service ) Class-based bandwidth guarantee by user-defined traffic categories
DiffServ Code Poing classifying
4-level priority for each direction ( Inbound / Outbound )
Bandwidth borrowed
Automatic WAN speed detection
 
5. Firewall Facilities IM/P2P blocking
Mult-NAT, DMZ host, port-redirect / open port
Rule-based packet filtering
SPI ( Stateful Packet Inspection )
DoS / DDoS protection
IP address anti-spoofing
Logging via syslog
 
6. Network Features IGMP proxy / Snooping
DHCP client / relay / server
Dynamic DNS
SNTP client
Call scheduling
RADIUS client
DNS cache / proxy
UPnP
Routing protocol :
Static routing
RIP V2
 
7. Content Filtering URL keyword blocking ( Whitelist and Blocklist )
Java applet , cookies , Active X , compressed , executable , multimedia file blocking
Web Content Filter ( SurfControl )
Time Schedule Control
 
8. Router Management Web-based user interface ( HTTP/ HTTPS )
Quick Start Wizard
CLI ( Command Line Interface, Telnet / SSH* )
Administration access control
Configuration backup / restore
Build-in diagnostic function
Firmware upgrade via TFTP / FTP
Syslog
SNMP management MIB-II
 
Comments